1. Ensure proper alignment After extended periods of use, a crane may become misaligned and lean to one side, causing excess tension on the machine. Crane operators should always be aware of the stat
1. Part of the rubber paver machine is the daily technical maintenance, that is, the operator can reasonably keep the equipment, daily inspection, regular maintenance and correct operation and use of
Check the burnout of the contact contacts of the scraper winch master controller, electromagnet contactor, various relay signal devices, etc. If there is burnout, repair or replace the contacts in tim
(1) Always check whether the bolts, rivets, pins and other connecting parts of the scraper winch are loose or fall off, especially for the bearing seat bolts and anchor bolts. If they are loose, they
(1) Clean the paver: remove the mud, sticky sand and asphalt accumulated on the surface of the paver; remove the dust and grease on the surface of the engine, hydraulic components and other components
Motor equipment: including the inspection of the motor, power supply and transmission line, electric control box, each switch should be in a prescribed state.
©China Mining&Construction Equipment Co., Ltd. © 2016
Address:No. 11, North of Kaiyuan Road, High-tech Zone, Jining City, Shandong Province, China
Executive Editor:Zhang Wen